注意!原文(英文)中有错误!
H=暂控:生产过程中的特定检测点,生产中如果任何特定项目, 加工以及功能调试
项目没有质检员监视和认可,产品生产到了这个质检点必须停下,接受检验,通过
方能进入下一工序继续.一旦发生这种情况,要至少在48小时的时间内通知各相关
部门.
w=目测观察:生产过程中的特定检测点,生产过程在此处应有质检员监视和认可.
如果质检员不能到位,生产必须停下,事先要至少在24小时的时间内通知各相关部
门.
M=监视:生产过程中的特定检测点,生产过程及功能调试在此处应有质检员监视和
认可.无须正式通知.
R=复查:所有相关质检或试验报告/证书都必须经过专门监督员复查.
A=实地质检:生产过程中的特定检测点,生产过程的特定作业,加工及功能调试在
此处应有质检员或专门人员进行.
(by ztlthb)