8. When shutdown (such as steel roller and feed rollers are Keys to use) then turn off the pump switch, a few minutes later, when there is no lamination roller liquid has to stop. And release the roller and all Contact pressure between steel rollers. Special Note: do not adjust the machine must be released between the steel roller and pressure roller, steel roller, and if the feed roller contacts together. but also to rise up roller, rubber roller to avoid unilateral time pressure deformation!
9.UV lights five minutes after the switch is turned to work properly. UV light is off after the five minutes to open, start the first open UV light, and then open the cooling fan.UV cooling fan and will be transferred to such a weak UV lamp to light up within minutes.Up until after the UV light and then transferred to the cooling fan slightly stronger UV. (To adjust the temperature according to the specific size, but best not to be transferred to the strongest at UV cooling fan, fan life so as not to affect long-term use) every day as Laminating together.Sticky film phenomenon occurs when the eject must be timely, so as not to roll in the machine can not be removed.
10.Iffor a long time or do not have dust, impurities, when required anhydrous alcohol and white silk cleaning roller and adjustable steel roller surface.
11. And to release the adjusted steel rollers and roller does not make close contact. Note to adjust the cleaning roller steel roller to leave, do not let the silk cloth roller involved in causing human damage.You'd better clean downtime.
12. It's the best random sent to live out the liquid outlet filter cloth (cut a small piece of wrapped tightly with cable ties), over a certain time to replace, to avoid entering into the debris inside the liquid lamination, plastic laminating roller or damage affect the lamination quality.
13.Continuous conveyor belt as a single UV leak, loosen the rear of the machine can be a little adjustment handle, so that correction can roll that can work!
14.UV curing unit on the left is the red knob switch gear UV light intensity adjustment, Click logo are weak, strong second gear.Factory set at strong gear.Can start any gear. Must also start thing as.
15. Adjustable wait to file for saving the weak . Laminating machines, such as glue stick, or when the paper feed roller when there shivering or stop-and-go phenomenon, check each sprocket, gear lock key is on the loose.
16.16 The machine designed to shield the ultraviolet, through the professional equipment to test the machine outside the UV intensity is much smaller than the sun's ultraviolet intensity. (Note: for non-UV-visible light, invisible to the naked eye, white is not the issue UV)
希望能帮到你,祝更上一层楼O(∩_∩)O
有不会的欢迎再继续问我(*^__^*)